2016-2023 TOYOTA TACOMA PRO-LITE FRONT WINCH BUMPER
2016-2021 TOYOTA TACOMA PRO-LITE FRONT WINCH BUMPER
U.S. BUILT Octane PRO-LITE Front winch bumper ships to your door ready to install, complete with 3-Stage texture Black Powdercoat. Featuring room for a 30" Curved Dual Row Light bar, Winch Mounting for up to a 12,000 LB Winch, HD Recovery Points.
First to bring a curved front bumper to market that actually contours the front of the vehicle, as well as the only manufacturer to allow room for a 12K winch combined with a 30” Curved or Straight Dual Row LED light bar.
This Pro-Lite style bumper uses your factory bumper skin, instead of replacing the entire bumper. Installation is simple with only basic hand tools needed; After trimming your factory bumper, the bumpers directly bolt on to your vehicle. Most Installations are completed in a few hours or less.
Winch is mounted directly into the bumper and a 30" dual row curved LED Light bar is located above it. We also include two center-section lighting options for the bumper. You can either choose to install a 30” Curved or Straight dual row LED Light bar, or install eight 3” LED Cube lights. Both light mounting options are included, and the choice is yours which look you prefer to use.
All of our winch bumpers have winch free spool access points on the front side of the bumper
Trimming of Factory front bumper is required for installation
- Bumper Accepts up to a 12,000 LB Winch (Does not fit warn M Series)
- Top Mounted Winch Control/solenoid Boxes must be relocated
- Center Light options include 30” Curved/Straight dual row LED Light bar, or Eight 3” LED Cube Lights
- Include heavy-duty recovery points with a 1” Thru-hole size (for D-rings)
- Designed & Manufactured in the USA from 3/16” Steel Plate
- Bumpers ships complete with 3-Stage Black Texture powder coat (Bare steel available for customers to arrange their own paint or coating color, Select in options)
- Lights and Winches available. Please contact us for more available brands and options -contact-
PLEASE NOTE, owner of this Tacoma also trimmed the corners of the factory urethane bumper, this is not necessary to install this bumper
BELOW, OTHER AVAILABLE BUMPERS STYLES
Above, notice the dark plastic bumper cover remnants under headlights, this is all that will be left of your original bumper cover. you can cut your original cover or purchase an inexpensive used or "new imported" bumper cover to cut up and save your original. Cutting of Plastic Bumper Cover is Needed to Complete Fitment. Complete instructions with templates included with bumper
Other Toyota models available
ABOVE, WINCH VERSION ON A *4th GEN.
3rd GEN CENTER SECTION WITH WINCH IS SIMILAR, (large light opening substituted for fairlead opening and 2 smaller lights)
MATCHING REAR HIGH CLEARANCE BUMPER FOR YOUR ADVENTURE VEHICLE -more details-
UNIQUE & VERSATILE LIGHT MOUNTING OPTIONS
Lighting options shown on 4th gen Ram, same configuration on 3rd gen Ram
BELOW HIGH CLEARANCE & FULL COVERAGE REAR BUMPERS
*CONTACT US FOR DETAILS & AVAILABILITY FOR YOUR MODEL